★ ★ ★ ★ ★
Rated 4.8 (1,898) Verified Reviews · UL certified · Free shipping · Lifetime Warranty
Firefighters spraying water from a fire truck ladder

Sleep easier knowing both gas threats are being monitored

Natural gas can escape before it burns.

Faulty fuel-burning appliances can cause carbon monoxide to leak at home.

No more wondering whether a faint smell mattered.

No more assuming one green light covers every gas threat.

20+ lives lost to carbon monoxide poisoning

300+ home fires and explosions involving natural gas

4,000+ people treated in emergency departments

Tolls for home-related incidents in the UK for 2025 alone.

Rexorer Detector+ alarms when either reaches unsafe levels, while showing you both live readings.

Rated 4.8 (1,898) Verified Families
  • UL Certified
  • Free Shipping
  • Lifetime Warranty
Rexorer Detector+ carbon monoxide and natural gas detector

THE TECHNOLOGY BEHIND THE REASSURANCE

Two different threats need more than one ordinary alarm. Detector+ allows you to see more, understand more and rely less on guesswork.
Feature product image

Monitor Two Gas Threats With One Device

Detector+ uses an intelligent detection chip to continuously monitor carbon monoxide and natural gas.

See Live Readings — Not Just a Green Light

Watch the display cycle between carbon monoxide and natural-gas readings.

Understand What the Lights Mean

Separate POWER, ALARM and FAULT indicators help you distinguish normal operation from a warning or detected fault.

Hear the Warning When It Matters

An 85+ dB sound-and-light alarm activates when carbon monoxide or natural gas reaches alarm conditions.

Check More Than Gas Levels

View temperature and humidity alongside clear power, alarm and fault indicators.

Won't False-Alarm Whilst Cooking

Detector+ monitors carbon monoxide and natural gas—not smoke or steam.

Plug In Without Tools or Wiring

Connect Detector+ to a compatible wall outlet, allow approximately 200 seconds for preparation and monitoring begins.

What Your Alarm Detects

Smoke alarms and carbon-monoxide alarms are essential—but in a home that uses gas, they do not cover every threat. 84% of homes in Great Britain were connected to the gas grid in 2024. Source: UK government
Smoke Alarm
1

Smoke Alarm

Only reacts to smoke. It misses both carbon monoxide and natural gas, giving you only silence or an alarm.

Static CO-only Alarm
2

Static CO-only Alarm

Monitors carbon monoxide but misses natural gas. Without live readings, you cannot see CO levels rising before the alarm condition is reached.

Rexorer Detector+
3

Rexorer Detector+

The superior all-in-one option. Its intelligent chip monitors both carbon monoxide and natural gas while displaying live readings—giving you greater visibility and more complete protection.

Detector+ adds carbon monoxide and natural gas monitoring for broader protection in homes with gas appliances.

★ ★ ★ ★ ★ ★
Rated 4.8 | 1,898 Reviews

Certified 4-in-1 Detector. Watches for CO & Natural Gas While Your Family Sleeps. Replaces Green Light with Live Reading

Anxiety-free night's sleep
Family protection
Stop guessing, start knowing
Safer home
18 units in stock
64 sold in the last 24h
Offer ends in 00:00:00
Free Shipping Included
Secure Checkout
Shop Pay
Debug - Avatar URL received: files/hf_20260522_223204_5187d070-3feb-482c-a70f-83b33d3e3450.webp
Zach O.
Zach O.

"I thought the CO alarm in our new apartment already monitored all gases. I was wrong. Spent a few weeks smelling gas whilst my wife called me crazy. Now I can check both readings instead of depending on the green light and my own senses"

Lifetime Warranty

Your Detector+ is protected against covered manufacturing faults for its stated service life.


Description +

Rexorer Detector+ monitors carbon monoxide and natural gas from one plug-in device.

Its digital screen shows the live readings one after the other, alongside room temperature and humidity. Separate POWER, ALARM and FAULT indicators help you understand the detector’s status without an app or subscription.

How to use + what's in the box +

Plug Detector+ into a suitable wall outlet and follow the placement instructions.

Use the TEST button regularly as part of your home-safety routine.

Inside the box:

  • 1 × Rexorer Detector+
  • 1 × Instruction manual
Features +
  • Carbon-monoxide monitoring
  • Natural-gas monitoring
  • Live digital readings
  • Audible and visual warning
  • POWER, ALARM and FAULT indicators
  • TEST button
  • Temperature display
  • Humidity display
  • No Wi-Fi, app or subscription
Frequently Asked Questions +

What Does Detector+ Monitor?

Detector+ monitors both carbon monoxide and natural gas, while also displaying room temperature and humidity—all from one compact device.

Why Monitor Both Gases?

Carbon monoxide and natural gas are different threats requiring different sensors. Many standard alarms monitor only one. Detector+ helps close that gap.

How Does It Work?

Plug Detector+ into a wall outlet and it begins monitoring the surrounding air. The colour display cycles through live readings and sounds an alarm when a dangerous level is detected.

How many do I need, and where should I put them?

Place Detector+ in areas where your family spends time or near gas-powered appliances. Use multiple detectors across key areas of your home.

Is Detector+ UL Certified?

Yes. Detector+ is UL certified, giving you verified protection that has undergone recognised safety testing. Avoid cheap, uncertified replicas.

What Does the Lifetime Warranty Cover?

Your purchase is protected by our Lifetime Warranty. If your Detector+ develops a covered fault, contact our support team for help with a replacement.

Shipping & Returns +

Orders are shipped in 24-48h with tracking. For all info shipping and returns related visit our Shipping & Returns Policy.


Don’t Risk Cheap Replicas

Always check the CO & natural gas detector you purchase is UL certified. Cheap, uncertified replicas may look similar but do not pass the same quality checks.
Your family & home safety is not worth the risk.

Certifications & Compliance

Who It’s Built For

Who Should Own a Detector+?

If your home uses fuel-burning appliances and you’re responsible for keeping others safe—Detector+ is built for you.

Parents & Families

Protection for the rooms where the people you love sleep.

Homes That Use Gas

For homes with a stove, boiler, furnace, water heater or fireplace.

Older Homes

Added reassurance around ageing pipes, fittings and appliances.

Renters & New Homeowners

Know what’s happening around appliances and safety systems you didn’t choose.

Ageing Parents & Loved Ones

Simple plug-in monitoring with clear readings they can easily check.

Placement and Bundle Guide

Choose a bundle, then see how Detector+ could fit into your home—or the homes of people you care about.

A Smaller Home, Two Places to Consider

Where could two go?

Start by looking at a suitable position outside your sleeping area. Then consider a second position in a living area where your household spends time. The illustration shows one way to begin planning; your outlet positions will determine where each unit can go.

More Rooms. More Places to Consider.

Where could four go?

Think about each level, separate sleeping areas, and the rooms your family uses most. Four units give you more flexibility to plan suitable positions throughout the home, especially when everyone isn’t gathered in one part of it.

A Home With More Places to Consider or More than One Home

Where could eight go?

When bedrooms are spread across different parts of the house, the kitchen and living room are separate, and your family uses more than one floor, there are more positions to think through. The 8-pack gives you flexibility to plan suitable locations near separate sleeping areas and throughout the lived-in parts of your home.

One alarm. One sensor.

One alarm. One sensor. One blind spot.

CARBON MONOXIDE AND NATURAL GAS ARE NOT THE SAME THREAT.

They may be connected to the same appliances, but they appear for different reasons.
Carbon monoxide
Carbon monoxide can be produced when fuel does not burn properly.
It has no colour or smell, and early exposure can feel like a headache, tiredness, dizziness or the flu.
Natural gas
Natural gas is the fuel supplied to appliances such as stoves, furnaces and water heaters.
If it escapes before burning, it can create a fire or explosion risk. Its added odour can help, but faint or intermittent leaks may still be missed or dismissed.
Two different gases require two different forms of detection.
Detector+ monitors carbon monoxide and natural gas from one plug-in device.
THE DANGER DOESN’T WAIT UNTIL MORNING

THE DANGER DOESN’T WAIT UNTIL MORNING

You Can’t Watch the Air While You Sleep. Detector+ Can
Furnaces, boilers, water heaters, gas stoves, fireplaces and attached garages can introduce carbon monoxide when combustion goes wrong. Ageing pipes, loose fittings and gas appliances can also allow natural gas to escape inside your home.
The Silent Killer
Carbon monoxide has no colour or smell. Early exposure can feel like tiredness, a headache or the flu—making it easy to miss while levels continue rising.
Your Nose Goes Off Duty
Natural gas has an added warning smell, but your nose can become accustomed to it. When you’re asleep, the smell may not wake you at all.
Who Is Watching While You Sleep?
Without proper monitoring, you are relying on smell, symptoms or an alarm that may cover only one threat. Detector+ monitors both carbon monoxide and natural gas, displays live readings and sounds when an alarm condition is reached.
Don’t wait for a smell, symptom or siren to become your first warning.

Frequently Asked Questions

Find more answers to common questions about Detector+

Does Detector+ replace my smoke or carbon monoxide alarms? +

Detector+ does not detect smoke, so keep your existing smoke alarms. It can also be used alongside your existing battery-powered carbon monoxide alarms to add natural-gas monitoring and visible readings.

Will cooking cause a false alarm? +

Activities near the detector can affect a gas reading. Never assume an alarm is false because you were cooking, and never use a displayed number to decide that the air is safe. Follow the safety instructions whenever an alarm sounds.

How do I check that Detector+ is working? +

Use the TEST button as directed in the instructions supplied with your unit, and pay attention to any fault indication. Testing the audible warning does not prove that every sensor will detect every hazard, so follow the model’s instructions for maintenance and replacement.

Can I use Detector+ in a rental or RV? +

It plugs into a compatible wall outlet without permanent installation, which may make it suitable for a rental. RV use should only be stated as supported if the current model’s instructions confirm it. In either setting, keep any alarms required for the property or vehicle.

What should I do if Detector+ alarms or I smell gas? +

Leave the property and follow local gas emergency instructions. Do not operate electrical switches or use Detector+ to investigate a suspected leak. Contact the gas emergency service from a safe location.

Is Detector+ certified? +

Yes. Detector+ is presented with UL and CSA certification marks, alongside UKCA, CE, FCC and RoHS compliance marks. You can see them in our Certifications & Compliance section.

What does the lifetime warranty cover? +

Our Lifetime Warranty covers Detector+ for the full five-year rated life of its sensor, starting on the date of delivery. If a fault caused by defective materials, components or workmanship develops during that period, we’ll send you a replacement at no cost. This includes faults with the sensor, display, alarm or TEST button.

To make a claim, email hello@rexorer.com with your order number, a brief description and a video showing the fault. See our Refund Policy for the full warranty terms and exclusions.

Doesn’t my current carbon monoxide alarm already detect natural gas? +

A CO-only alarm detects carbon monoxide, not natural gas. Detector+ monitors both gases and shows their readings on its display.

How many Detector+ units do I need, and where should I place them? +

That depends on your home’s layout, floors and the rooms you want to monitor. One unit should not be assumed to cover an entire property. Choose suitable outlets in your priority rooms and follow the placement instructions supplied with Detector+, as the right position can vary by room and gas.

Detector+
Excellent 4.8 | 1,898 reviews

Detector+

Arrives by
Arrives by

Lifetime Warranty

Your Detector+ is protected against covered manufacturing faults for its stated service life, subject to the warranty terms.

CLAIM NOW
Certified
Free Shipping
Rated 4.8/5 by 1,898 as of August 2026

Lifetime Warranty

Your Detector+ is protected against covered manufacturing faults for its stated service life, subject to the warranty terms.

CLAIM NOW
Certified
Free Shipping
Rated 4.8/5 by 1,898 as of August 2026
Rated 4.8/5 based on 1,898

More Reviews

✓ All reviews are verified by our system

14 September 2026

Paste the customer's review here exactly as they wrote it.

Customer name Verified Buyer
14 September 2026

Paste the customer's review here exactly as they wrote it.

Customer name Verified Buyer
09 July 2026

Peace of mind

Installed 4 detectors in our new apartment and 6 months later i still regularly test and all good with no false alarms

Zacharia B. Verified Buyer
Purchased: 4-Pack, White